24259 - NTK Oxygen (O2) Sensor


Images May Not be Vehicle Specific. For Display Purposes Only.

Images Of This Specific Part Number

Non-Specific Images

Place Order Here

Part #: 24259
Notes: OE Type Oxygen Sensor
MSRP: $192.41
Your Price: $65.48

Specs

Mounting Type Threaded
Sensor Type Heated
Thread Diameter 18.000
Universal Or Specific Fit Specific
Wire Harness Length 16.7500
Wire Quantity 4

This Item Also Available In

Part Number Price Notes & Specs
24255 $65.48 Notes OE Type Oxygen Sensor
Mounting Type Threaded
Sensor Type Heated
Thread Diameter 18.000
Universal Or Specific Fit Specific
Wire Harness Length 21.5000
Wire Quantity 4

All Fitments

ACURA
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2005 - 2008 RL ALL V6 3.5 ALL ALL ALL Position: Downstream Front
2006 - 2006 TL ALL V6 3.2 ALL ALL ALL Position: Downstream Front; Automatic Trans;
HONDA
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2005 - 2007 ACCORD ALL V6 3.0 ALL ALL ELECTRIC/GAS Position: Downstream Front
2006 - 2007 ACCORD ALL V6 3.0 ALL ALL GAS Position: Downstream Front; Automatic Trans;
2005 - 2007 ODYSSEY ALL V6 3.5 ALL ALL ALL Position: Downstream Front
2008 - 2010 ODYSSEY ALL V6 3.5 ALL J35A6 ALL Position: Downstream Front
2005 - 2008 PILOT ALL V6 3.5 ALL ALL ALL Position: Downstream Front
2006 - 2008 RIDGELINE ALL V6 3.5 ALL ALL ALL Position: Downstream Front
SATURN
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2004 - 2007 VUE ALL V6 3.5 ALL ALL ALL Position: Downstream Front

Product Description

Oxygen (O2) Sensors are used in modern automobiles to control the fuel and ignition systems to optimize a car’s performance in the areas of emissions and fuel economy. Sensors are located before and after the catalytic converter to check on the amount of oxygen in the exhaust. The sensor sends signals to the car’s on-board computer, which then can adjust several variables, including air/fuel ratio and timing, in order to bring the engine into the optimum operating range.

Each NTK Oxygen (O2) Sensor is:

  • Extensively Tested During Manufacture to Guarantee Quality and Reliability
  • Supplied With a Factory-Fitted OEM Connector for Easy Installation
  • Precision manufactured with a sensing element incorporating NTK’s premier technical ceramics

Oxygen (O2) Sensors should be tested at each tune-up. Failed or worn out oxygen sensors can cause:

  • Failed Emission Tests
  • Increased Fuel Consumption
  • Failed Catalytic Converters
  • Poor Driveability
  • Increased Emissions

Product Reviews

Be the first to review this item.

Rating
Title
Review